Skip to main content

BPGCD Treated Water Quality Testing Request

Blanco-Pedernales Groundwater Conservation District provides the results of the analysis reported herein, as an advisory public service only. Please note that Blanco-Pedernales Groundwater Conservation District is not a certified laboratory and the results provided are furnished solely for the benefit of the addressee above. The District disclaims any liability for the testing, analysis and report to every person whatsoever, including without limitations, the addressee here in.

 

PLEASE READ ALL INSTRUCTIONS BEFORE TAKING YOUR SAMPLE

  1. Sample must be taken in plastic sample bottle provided by BPGCD. We cannot accept a sample in any other container.
  2. Sample must be delivered to BPGCD office within 2 hours of taking.
  3. Samples are accepted on Wednesdays ONLY from 8am to 2pm.
  4. Choose a faucet closest to the water source, such as an outside faucet.
  5. Remove any hoses or other attachments (aerator or sprayer).
  6. Let the water run for at least 3 minutes at full force then to a trickle.
  7. Open sample bottle, being careful not to touch the inside of the bottle or lid.
  8. Fill bottle completely and close.
  9. Keep sample cold, on ice, until it can be delivered to BPGCD office.
  10. Deliver the sample to BPGCD office within 2 hours of collection.
  11. Lab processing fee is payable to CHECK and due at the time of drop off.
There was a problem saving your submission. Please try again later.
Please wait while your submission is being saved...
Thank you, your submission has been received.